Differences

This shows you the differences between two versions of the page.

--- topic:engineering:cryogenics:electronics:passive-components [2021/02/24 21:51] – samuel
+++ topic:engineering:cryogenics:electronics:passive-components [2021/03/23 22:08] (current) – [Capacitor] samuel
@@ Line 2: / Line 2: @@
 ===== Resistor =====
+Metal Thin Film resistors are very temperature stable. \cite{Homulle:2019}
 ^ Susumu, RR1220P-104-D | 100kOhm | \cite{Cahall.Gauthier.ea:2018}, \cite{Lamb:2014} |
 ^ Susumu, RR1220P-101-D | 100 Ohm | \cite{Cahall.Gauthier.ea:2018}, \cite{Lamb:2014} |
+^ Vishay, FC0603E50R0BST1 | 50 Ohm | \cite{Homulle:2019} |
+^ Panasonic ERA-3AEB4990V | 499 Ohm | \cite{Homulle:2019} |
 Literature:
@@ Line 10: / Line 14: @@
 ===== Inductor =====
 ^ Epcos, B82496C3221J000 | 220nH | \cite{Cahall.Gauthier.ea:2018} |
+^ Taiyo Yuden chip inductor (0402) | 2.28uH (1.37uH, 1 Ohm @ 4K) | \cite{Buchanan.Benford.ea:2012} |
 ===== Capacitor =====
+Foil capacitors (e.g. ECPU, ECHU and PPS) reduced their capacitance significantly at cryogenic temperatures. NP0 capacitors show little change of capacitance during cooling. \cite{Pan:2005}
+Below 1uF NP0/C0G and Acrylic Film are the way to go, above tantalum polymer capactitors.\cite{Homulle:2019}
 ^ Kemet, C0805C473J3GACTU | 0.047uF, Ceramic capacitor, used as decoupling capacitor, cold they have $\approx 11pF$ | \cite{PaqueletWuetz.Bavdaz.ea:2020} |
 ^ Kemet, C0603C153J3GACTU | 0.015µF, Ceramic capacitor, used as decoupling capacitor, cold they have $\approx 2pF$ | \cite{PaqueletWuetz.Bavdaz.ea:2020} |

Kollektanee - Samuel Gyger